Model No. NTCCBE19520
Serial No.
Write the serial number in the
space above for future reference.
USER’S MANUAL
Serial Number Decal (under seat)
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, please call:
1-888-936-4266
Mon.–Fri. 8h00 until 18h30 EST
(excluding holidays).
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Visit our website at
BEFORE YOU BEGIN
Thank you for selecting the versatile PILATES by
NordicTrack® exercise bench. The PILATES exercise
bench features more than 500 exercises to develop
every major muscle group of the body. Whether your
goal is to tone your body, increase muscle size and
strength, or improve your cardiovascular system, the
PILATES exercise bench will help you to achieve the
specific results you want.
reading this manual, please call our Customer Service
Department toll-free at 1-888-936-4266, Monday
through Friday, 8h00 until 18h00 Eastern Time
(excluding holidays). To help us assist you, please note
the product model number and serial number before
calling. The model number is NTCCBE19520. The serial
number can be found on a decal attached to the exer-
cise bench (see the front cover of this manual).
For your benefit, read this manual carefully before
using the exercise bench. If you have questions after
Before reading further, please review the drawing below
and familiarize yourself with the parts that are labeled.
Headrest
Pulley Housing
Nylon Rope
Pulley Tube
Shoulder Block
Outer Frame
Handle
Carriage
Resistance Cord
Adjustment Knob
Inner Frame
Foot Bar
Resistance Bracket
Warning
Decal
NordicTrack is a registered trademark of ICON Health & Fitness, Inc.
3
ASSEMBLY
• As you assemble the exercise bench, make sure
all parts are oriented as shown in the drawings.
Make Things Easier for Yourself
Everything in this manual is designed to ensure
that the exercise bench can be assembled suc-
cessfully by anyone. Most people find that by
setting aside plenty of time, assembly will go
smoothly.
• Assembly requires two people.
The following tools (not included) are required
for assembly:
• two adjustable wrenches
• one standard screwdriver
Before beginning assembly, carefully read the
following information and instructions:
• one Phillips screwdriver
• one Rubber Mallet
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
1. Tighten the Adjustment Knob (17) into the hole in
the bottom of Outer Frame (1), and engage the
adjustment hole in the Inner Frame (2).
1
1
2
17
2. Insert a Pulley Tube (12) into the end of the Outer
Frame (1). Tighten the Pulley Tube into the top of
a Wheel Leg (13). Note: Be sure that the Wheel
(19) attached to the Wheel Leg is parallel to
the Carriage (6), and that the holes in the
Pulley Tube are parallel to the end of the
Outer Frame, as shown.
2
12
12
6
1
Attach the other Pulley Tube (12) and Wheel Leg
(13) in the same manner.
13
13
19
4
3. Insert the Foot Bar (32) into the end of the Inner
Frame (2). Attach two Cap Legs (14) to the ends
of the Foot Bar.
3
32
2
14
4. Attach the Headrest (9) to the long ends of the
pair of Headrest Frames (7) with four M6 x 18mm
Screws (36).
4
9
7
36
36
5. Rest the exercise bench on its side for this step.
5
Attach the pair of Headrest Frames (7) to the bot-
tom of the Carriage (6) with four M6 x 18mm
Screws (36). Be sure that the Headrest (9) is
above the Carriage, as shown in step 6.
9
7
6
7
36
36
5
6. Tighten the two Carriage Tubes (11) into the
holes in the Carriage (6).
6
10
Slide a Shoulder Block (10) onto each Carriage
Tube (11).
11
11
6
7. Pull the Adjustment Knob (17) out of the Inner
Frame (2). Slide the Inner Frame out of the Outer
Frame (1) and engage the Knob into the adjust-
ment hole in the Inner Frame.
7
Slide the Carriage (6) to the indicated end of the
exercise bench.
6
1
17
2
8. Reach under the Carriage (6) and insert an M10
x 50mm Carriage Bolt (41) through the indicated
hole in the Outer Frame (1).
8
Tighten a Cap Leg (14) onto the M10 x 50mm
Carriage Bolt (41).
41
6
1
14
6
9. Orient the two Pulley Housings (26) as shown.
Slide the Eyebolt/Pins (51, 52) into a set of holes
in the Pulley Tubes (12).
9
51
26
12
23
52
23
12
Route a Nylon Rope (23) through a Pulley
Housing (26) in the direction shown. Route the
other Nylon Rope through the other Pulley
Housing as shown.
10. Insert the ends of the two Rope Storage Knobs
(31) into the square holes in the Carriage Plates
(49, not shown). Attach the Rope Storage Knobs
to the Carriage (6) with two M6 x 61mm Screws
(47).
10
Route the Nylon Ropes (23) through the Rope
Grips (28). Pull on the Ropes so that they are
secure in the teeth on the Rope Grips.
31
47
Wrap the ends of the Nylon Ropes (23) around
the Rope Storage Knobs (31).
28
31
47
23
6
11. Make sure that all parts have been properly tight-
ened. The use of the remaining parts will be
explained in ADJUSTMENTS, beginning on the
following page.
7
ADJUSTMENTS
This section explains how to adjust the exercise bench. Refer to the accompanying exercise guide and video to
see the correct form for each exercise.
Make sure that all parts are properly tightened each time you use the exercise bench. Replace any worn parts
immediately. The exercise bench can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not
use solvents.
ADJUSTING THE PULLEY HEIGHT
51
26
26
To adjust the height of the Pulley Housings (26), pull
the Eyebolt/Pins (51, 52) out of the Pulley Tubes (12).
Reinsert the Eyebolt/Pins into another set of adjust-
ment holes in the Pulley Tubes.
52
12
Adjustment
Holes
12
ADJUSTING THE NYLON ROPE LENGTH
To adjust the length of the Nylon Ropes (23), hold the
Handles (24) together between the Shoulder Blocks
(10). Pull the Ropes free from the Rope Grip (28)
teeth.
10
Pull a Nylon Rope (23) tight and resecure it in the
teeth of the Rope Grip (28). Wrap the end of the
Rope around the Rope Storage Knob (31).
Repeat with the other Nylon Rope (23).
10
24
28
31
23
8
ADDING RESISTANCE
To add resistance to the movement of the Carriage
(6), engage a Resistance Cord (22) to the Resistance
Bracket (21) on the Inner Frame (2). To add more
resistance, engage more Resistance Cords to the
Bracket.
6
22
21
2
STORING THE EXERCISE BENCH
The exercise bench can be shortened when not in use.
To change the length of the bench, pull the Adjustment
Knob (17) out of the Inner Frame (2). Slide the Inner
Frame into, or out of, the Outer Frame (1). Engage the
Knob into one of the adjustment holes in the Inner
Frame (2).
1
2
17
Adjustment
Hole
Adjustment
Hole
9
PART LIST—Model No. NTCCBE19520
R0602B
Key No. Qty.
Description
Key No. Qty.
Description
1
2
3
4
5
6
7
8
1
1
1
1
1
1
2
4
1
2
2
2
2
3
3
4
1
1
2
4
2
4
2
2
2
2
2
2
Outer Frame
Inner Frame
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
#
2
12
2
1
1
2
2
12
2
2
4
2
1
2
2
8
4
2
2
2
2
4
1
1
4
1
1
1
Grip Base
Bearing
Rope Storage Knob
Foot Bar
Outer Frame Cover
Inner Frame Cover
Carriage Frame
Carriage
Headrest Frame
25mm Round Inner Cap
Headrest
Shoulder Block
Carriage Tube
Pulley Tube
Foot Bar Cover
M6 x 45mm Screw
Inner Frame Cap
M6 x 18mm Screw
M4 x 20mm Screw
M4 x 16mm Screw
M8 x 84mm Bolt
M4 x 40mm Screw
M10 x 50mm Carriage Bolt
M10 x 65mm Bolt
M10 Nylon Locknut
M8 Nylon Locknut
M10 Washer
M8 x 36mm Bolt
M6 x 61mm Screw
Large Carriage Wheel
Carriage Plate
M6 x 15mm Screw
Left Eyebolt/Pin
Right Eyebolt/Pin
M8 Washer
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Wheel Leg
Cap Leg
50mm Round Outer Cap
75mm Square Inner Cap
Adjustment Knob
Adjustment Spacer
Wheel
Wheel Spacer
Resistance Bracket
Resistance Cord
Nylon Rope
Handle
Small Carriage Wheel
Pulley Housing
Pulley
User’s Manual
Exercise Guide
Video
#
#
Rope Grip
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of the user’s manual for information about ordering replacement parts.
10
EXPLODED DRAWING—Model No. NTCCBE19520
R0602B
10
8
11
8
23
11
9
6
7
7
24
36
49
36
21
36
46
31
50
31
51
50
34
46
22
47
47
26
52
30
27
30
30
53
39
25
30
30
37
28
26
44
38
44
33
44
27
30
25
29
30
8
30
53
36
5
39
8
39
37
53
30
36
32
4
12
29
28
38
12
48
44
36
30
3
44
30
39
36
53
16
48
30
35
40
41
1
16
21
16
2
13
20
45
20
42
45
13
20
18
17
14
16
14
15
43
19
45
14
20
19
42
15
11
ORDERING REPLACEMENT PARTS
To order replacement parts, simply call our Customer Service Department toll-free at 1-888-936-4266, Monday
through Friday 8h00 until 18h30 Eastern Time (excluding holidays). To help us assist you, please be prepared to
give the following information:
1. the MODEL NUMBER of the product (NTCCBE19520)
2. the NAME of the product (PILATES by NordicTrack® exercise bench)
3. the SERIAL NUMBER of the product (see the front cover of this manual)
4. the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and the EXPLODED DRAWING on
pages 10 and 11 of this manual).
LIMITED WARRANTY
ICON OF CANADA, INC., (ICON), warrants this product to be free from defects in workmanship and mate-
rial, under normal use and service conditions, for a period of one (1) year from the date of purchase. This
warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replac-
ing or repairing, at ICON's option, the product through one of its authorized service centers. All repairs for
which warranty claims are made must be pre-authorized by ICON. This warranty does not extend to any
product or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or
abnormal usage or repairs not provided by an ICON authorized service center, to products used for com-
mercial or rental purposes, or to products used as store display models. No other warranty beyond that
specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connec-
tion with the use or performance of the product or damages with respect to any economic loss, loss of prop-
erty, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other conse-
quential damages of whatsoever nature. Some provinces do not allow the exclusion or limitation of inci-
dental or consequential damages. Accordingly, the above limitation may not apply to you. The warranty
extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantabili-
ty or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein. Some
provinces do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation
may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from province to
province or so specified by the retailer of your equipment.
ICON OF CANADA, INC., 900 de l’Industrie, St. Jerôme, QC J7Y 4B8
Part No. 185250 R0602B
Printed in China © 2002 ICON Health & Fitness, Inc.
|